王渠东——材料学专家、上海交通大学教授

科学研究：

研究方向：

目前主要从事镁合金及其成形技术研究。

 

承担科研项目情况： 

 

 

负责、参加和完成了国家自然科学基金、国家科技攻关、863项目、上海市科技攻关、美国GM公司国际合作、中法国际合作项目、日本文部科学省重大项目等40余项。

1、2008年主持完成国家科技支撑计划专题“低成本压铸耐热镁合金及生产技术”。

2、2008年主持完成国家安全重大基础研究课题“镁合金强韧化基础研究”。

3、2008年主持完成上海-法国罗阿大区国际合作课题“耐热变形镁合金研究”。

4、2006年主持完成国防科工委课题“XXX”。

5、2007-2009年往复挤压镁合金超细组织形成机理，国家自然科学基金，主持。

6、2007-2009年活塞用抗蠕变铸造镁合金的开发研究，Hitachi公司国际合作项目，主持。

7、2009-2011反复压缩大塑性变形制备Mg2Si自生增强超细晶镁基复合材料，.上海市科委基础研究重点基金，主持。

8、2011-2013反复镦压大塑性变形高性能稀土镁合金制备基础研究，国家自然科学基金，主持。

9、2010-一种制造电机铝转子的新方法，美国通用(GM)汽车公司国际合作项目，主持。

 

 

科研成果：

 

 

1.丁文江,卢晨,曾小勤,翟春泉,徐小平,王渠东,花传平,朱燕萍,吕宜振,卢大.镁合金便携式电子器材壳体制造技术开发.2001年上海市科技进步二等奖

2.丁文江,卢晨,曾小勤,翟春泉,徐小平,王渠东,花传平,朱燕萍,吕宜振,卢大.轿车用镁合金的研制.2001年中国汽车科技进步二等奖

3.丁文江,卢晨,曾小勤,翟春泉,徐小平,王渠东,花传平,朱燕萍,吕宜振,卢大.阻燃镁合金及其关键应用技术研究.2002年上海市科技进步二等奖

4.丁文江,卢晨,曾小勤,翟春泉,徐小平,王渠东,花传平,朱燕萍,吕宜振,卢大.阻燃镁合金及其应用关键技术研究.2003年国家科技进步奖二等奖

5.丁文江,曾小勤,王渠东,彭立明,蒋海燕,吴国华,郭兴伍,董杰,花传平,翟春泉.武器装备用高强度镁合金及其应用技术开发. 2006年国防科技进步二等奖

6.丁文江,卢晨,袁广银,王渠东,吴国华,曾小勤,郭兴伍,彭立明,董杰,蒋海燕.新型高性能耐热镁合金研制及其在汽车上的应用.2007年度上海市技术发明一等奖

7.丁文江,王渠东.铸造阻燃镁合金及其熔炼和铸造工艺.中国发明专利ZL99 1 13861.9. 2003年中国专利优秀奖.中华人民共和国国家知识产权局

8.丁文江,王渠东.塑性变形阻燃镁合金及其熔炼和塑性变形工艺. 中国发明专利ZL99 1 13862.7. 2004年上海市优秀发明专利二等奖

 

 

论文专著：

发表论文250篇，其中，SCI收录102篇、EI收录116篇，SCI论文他人引用80篇700余次，中国机械工程学会金奖论文1篇，在科学出版社出版著作1部。

 

出版专著：

《镁合金科学与技术》 科学出版社 2007

 

发表论文：

2011：

1.Tao Peng, QudongWang, JinbaoLin, ManpingLiu, HansJ.Roven. Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression. Materials Science and Engineering A, 2011, 528:1143-1148

2.Wei Guo, Qudong Wang, Manping Liu, Tao Peng, Xintao Liu, Hao Zhou. Microstructure and Mechanical Performance of AZ31-1.7 wt.% Si Alloy Processed by Cyclic Channel Die Compression. Materials Science Forum, 2011(667-669): 457-461

3.Xintao Liu, Manping Liu, Qudong Wang, Wei Guo, Dongdi Yin. Microstructure and Mechanical Properties of Mg-3Y Binary Alloy Processed by Cyclic Extrusion and Compression. Materials Science Forum, 2011(667-669): 767-771

4.Jirang Cui, Wei Guo, Hans Jørgen Roven, Qudong Wang, Yongjun Chen, Tao Peng. Recycling of Aluminum Scrap by Severe Plastic Deformation. Materials Science Forum, 2011(667-669): 1177-1182

5.V. Janik, D.D. Yin, Q.D. Wang, S.M. He, C.J. Chen, Z. Chen, C.J. Boehlert. The Elevated-Temperature Mechanical Behavior of peak-aged Mg-10Gd-3Y-0.4Zr Alloy. Materials Science and Engineering A, 2011(A528): 3105-3112

6.D.D. Yin, Q.D. Wang, Y. Gao, C.J. Chen, J. Zheng. Effects of heat treatments on microstructure and mechanical properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) alloy. Journal of Alloys and Compounds 2011(509):1696–1704

7.Vit Janik, Qudong Wang, Dongdi Yin, Wenjian Ding. Influence of Thermal and Thermo-mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy.Materials Science Forum, 2011(675-677): 487-490(The 7th International Forum on Advanced Material Science and Technology. 26-28 June 2010, The Dalian University of Techonlogy, Dalian)

8. F. Yang, F. Lv, X.M. Yang, S.X. Li, Z.F. Zhang, Q.D. Wang. Enhanced very high cycle fatigue performance of extruded Mg-12Gd-3Y-0.5Zr magnesium alloy. Materials Science and Engineering A, 2011(A528): 2231-2238

 

9.LI Daquan, WANG Qudong, and DING Wenjiang. Effects of Ho on the microstructure and mechanical properties of Mg-Zn-Ho-Zr magnesium alloys. Rare Metals. 2011

 

10.Vit JANIK, Qudong WANG, Dongdi Yin, Wenjian DING. Creep cavtitation and its mechanisms in Mg-RE-Zr alloys. 11th IUMRS International Conference in Asia. Magnesium(Fourth International Conference on Magnesium). Sept. 25-28, 2010. Qingdao, China

 

11.张莉,王渠东,丁文江. 镁基材料的摩擦磨损研究进展. 材料导报, 2011

12.张满意,郭兴伍,杨海燕,王渠东,丁文江.水热条件下Mg-3Nd-Zn-Zr合金化学转化膜的研究.腐蚀科学与防护技术,2011,23(3):

 

2010：

 

1.Qudong Wang, Yongjun Chen, Manping Liu, Jinbao Lin, Hans J. Roven. Microstructure evolution of AZ series magnesium alloys during cyclic extrusion compression. Materials Science and Engineering A, 2010, 527(9): 2265-2273

2.Qudong Wang, Jie Chen, Zheng Zhao, Shangming He. Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy. Materials Science and Engineering A, 2010, 528: 323-328

3.Jiang Zheng, Qudong Wang, Zhengli Jin, Tao Peng. Effect of Sm on the microstructure, mechanical properties and creep behavior of Mg-0.5Zn-0.4Zr based alloys. Materials Science and Engineering A, 2010, 527(7-8):1677-1685

4. Wei Wang, Guohua Wu, Ming Sun, Yuguang Huang, Qudong Wang, Wenjiang Ding. Effect of Fluxes Containing YCl3 on Yttrium Loss, Mechanical and Corrossion Properties of Mg-10Gd-3Y-0.5Zr Alloy. Mater. Sci. Eng. A, 2010(527):1510-1515

5.WU Guo-hua(吴国华),WANG Wei(t玮),SUN Ming(孙明),WANG Qu-dong(王渠东),DING wen-jiang(丁文江). Influence of GdCl3 addition on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy. Trans．NonferrousMet．Soc．China, 2010(20):1177-1183

5.G. H. Wu, W. Wang, Q. D. Wang, Y. G. Huang, M. Sun, W. J. Ding. Influence of RJ6 Flux Containing 5wt.% GdCl3 on Purifying Effectiveness and Properties of Mg-10Gd-3Y-0.5Zr Alloy. Mater. Trans., submitted ??

6.Jiang Zheng, Qudong Wang, Zhengli Jin, Tao Peng. The microstructure, mechanical properties and creep behavior of Mg-3Sm-0.5Zn-0.4Zr (wt.%) alloy produced by different casting technologies. Journal of Alloys and Compounds, 2010, 496(1-2):351-356

7.Tao Peng, Qudong Wang. Application of regression analysis to optimize hot compaction processing in an indirect solid-state recycling of Mg alloy. Materials Science Forum, 2010, 650: 239-245

8.T. Penga, Q. D. Wang, Y.K. Hanc, J. Zhenga, W. Guo. Consolidation behavior of Mg–10Gd–2Y–0.5Zr chips during solid-state recycling. Journal of Alloy and Compounds. 2010, 503: 253-259

9.Tao Peng, Qudong Wang, York Han, Jiang Zheng, Wei Guo. Microstructure and high tensile strength of Mg–10Gd–2Y–0.5Zr alloy by solid–state recycling. Materials Science and Engineering A, 2010, 528: 715-720

10.J. Chen, Q. D. Wang, T. Peng, Z. Zhao, W.J. Ding. Effect of extrusion temperature on microstructure and mechanical properties of Mg-8.5Gd-2.3Y-1.8Ag- 0.4Zr alloy solid state recycled by hot extrusion.Magnesium Technology 2010, Edited by Sean Agnew,Neale R. Neelameggham,Eric A. Nyberg, and Wim H. Sillekens. TMS(The Minerals, Metals & Materials Society), 2010. 319-322

11.Jiang Zheng, Qudong Wang, Zhengli Jin, Tao Peng. Effect of zinc additions on the microstructure mechanical properties and creep behavior of as-cast Mg-3Sm-0.4Zr (wt.%) alloy. Materials Science and Engineering A, 2010, 527: 4605-4612

12.WANG Qu-Dong(王渠东), GAO Yan(高岩), YIN Dong-Di(尹冬弟), Chen Chang-Jiang (陈长江). Characterization of phases in Mg-10Y-5Gd-2Zn-0.5Zr alloy processed by heat treatment. Trans. Nonfer. Metals Soc. China, 2010, 20(11): 2076-2080(为Prceeding of The 3rd CNY Symposium on Light Alloys 在中国有色金属学报英文版正刊发表)

13.LI Da-quan(李大全), WANG Qu-dong(王渠东), DING Wen-jiang(丁文江), J. J. BLANDIN, M. SUERY. Influence of extrusion temperature on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy. Trans. Nonfer. Metals Soc. China, 2010, 20(7): 1311-1315(为Prceeding of The 3rd Asian Symposium on Magnesium Alloys (Part A)在中国有色金属学报英文版正刊发表)

14.WU Guo-hua(吴国华), WANG Wei(王玮),SUN Ming(孙明),WANG Qu-dong(王渠东),DING Wen-jiang. Influence of GdCl3 addition on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy. Trans. Nonfer. Metals Soc. China, 2010, 20(7): 1177-1183(为Prceeding of The 3rd Asian Symposium on Magnesium Alloys (Part A)在中国有色金属学报英文版正刊发表),,

15.LIN Jin-bao( 林金保), WANG Qu-dong(王渠东), CHEN Yong-jun, LIU Man-ping, Hans J. Roven. EBSD CHARACTERIZATION OF THE MICROSTRUCTURE AND TEXTURE OF ZK60 ALLOY PROCESSED BY CYCLIC EXTRUSION AND COMPRESSION. Trans. Nonfer. Metals Soc. China, 2010, 20(11): 2081-2085(为Prceeding of The 3rd CNY Symposium on Light Alloys 在中国有色金属学报英文版正刊发表

16.陈杰,王渠东,赵政,丁文江.高强高韧Mg-8.5Gd-2.0Y-1.0Ag-0.4Zr合金的组织与性能. 高技术通讯, 2010, (4):

17.郭炜,王渠东.大塑性变形制备超细晶复合材料的研究进展. 锻压技术, 2010, 35(1): 4-8

18.陈长江,王渠东,尹冬弟,丁文江.时效态Mg-Gd-Y-Zr 镁合金压缩性能和组织演变.铸造,2010, 59(3): 304-307

19.陈长江,王渠东,尹冬弟,丁文江.镁-稀土耐热镁合金活塞的开发研究.特种铸造及有色合金, 2010, 30(5): 455-458

20.陈长江,王渠东,何志恒,尹冬弟,丁文江.耐热稀土镁合金活塞金属型铸造过程模拟分析.特种铸造及有色合金, 2010, 30(6): 517-519

21.陈长江,王渠东,尹冬弟,丁文江.不同温度下Mg-11Y-5Gd-2Zn-0.5Zr镁合金的拉压不对称性.机械工程材料, 2010, 34(8): 64-67

22.张满意,郭兴伍,杨海燕,王渠东,丁文江.镁合金水热法表面处理.材料保护,2010,43(7):14-17

23.杨合,李落星,王渠东,郭良刚.轻合金成形领域科学技术发展研究. 机械工程学报, 2010,46(12):31-42

 

2009：

1.LIN JinBao, PENG LiMing, Wang QuDong, ROVEN J R, DING WenJiang. Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature. Science in China E, 2009, 52(1):161-165

2.Jinbao LIN, Qudong Wang, Liming PENG, HANS J.Roven. Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and comporession. Journal of Alloys and Compounds, 2009,476(1-2): 441-445

3.Yan Gao, Qudong Wang, Jinhai Gu, Yang Zhao, Yan Tong, Dongdi Yin. Comparison of microstructure in Mg-10Y-5Gd-0.5Zr and Mg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting. Journal of Alloys and Compounds, 2009,477(1-2): 374-378

4.T. Peng, Q. D. Wang, M. P. Liu, J. Zheng, J. B. Lin.An optimization approach for hot compaction technology of Mg-10Gd-2Y-0.5Zr alloy during solid-state recycling. Powder Technology, 2009, 194:142-148

5.T. Peng, Q. D. Wang, J. B. Lin. Microstructure and mechanical properties of Mg-10Gd-2Y-0.5Zr alloy recycled by cyclic extrusion compression. Materials Science and Engineering A, 2009, 516:23-30

6.Wei. Wang, Guohua Wu, Qudong Wang, Yuguang Huang, Wenjiang Ding. Gd contents, Mechanical and Corrosion Properties of Mg-10Gd-3Y-0.5Zr Alloy Purified by Fluxes Containing GdCl3 Additions. Materials Science and Engineering A, 2009, 507(1-2): 207-214

7.Qudong Wang, Daquan Li, J.J. Blandin, M. Suéry, P. Donnadieu, Wenjiang Ding. Microstructure and creep behavior of extruded Mg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A. 2009, 516:189-192

8.Daquan Li, Qudong Wang, Wenjiang Ding. Effects of samarium on microstructure and mechanical properties of Mg-Y-Sm-Zr alloys during thermo-mechanical treatments. Journal of materials science, 2009, 44(12): 3049-3056

9.GAO Yan, WANG Qudong, GU Jinhai , ZHAO Yang. Effects of heat treatments on tensile properties and Creep Behavior of Mg-Y-Gd-Zr Alloys. Magnesium Technology 2009, Edited by Eric A. Nyberg, Sean R. Agnew, Neale R. Neelameggham, and Mihriban O. Pekguleryuz. (TMS2009)279-282

10.Wei Wang, Yuguang Huang, Guohua Wu, Qudong Wang, Ming Sun, Wenjiang Ding. Influence of flux containing YCl3 additions on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy. Journal of Alloys and Compounds, 2009, 480(2): 386-391

11.D.J. Li, Q.D.Wang, J.J.Blandin, M.Suery, J. Dong, X.Q. Zeng. High temperature compressive deformation behavior of an extruded Mg-8Gd-3Y-0.5Zr (wt.%) alloy. Materials Science and Engineering A, 2009, 526: 150-155

12.C. J. Chen, Q. D. Wang, D. D. Yin. Thermal Properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) Alloy. Journal of Alloys and Compounds, 2009, 487(1-2): 560-563

 

13.Yang ZHAO, Qudong WANG, Wei GAO. Microstructures and mechanical properties of Mg-7Y-3Sm-0.5Zr-xZn alloys. International Journal of Modern Physics B(2008年10月北京AMDP会议)

14.J.B. Lin, Q.D. Wang, L.M. Peng, Hans J. Roven. Finite element analysis of the equivalent strain distribution during cyclic extrusion and compression. (Submitted to Journal of Material Processing and Technology)

 

15.赵政,王渠东,丁文江. Mg-Gd-Ag-Zr合金的组织与力学性能.特种铸造及有色合金,2009,29(5): 477-479

16.金正力,王渠东,郑江,丁文江. Y含量对Mg-Zn-Zr合金组织和性能的影响. 特种铸造及有色合金,2009, 29(7): 656-659

17.陈杰,王渠东,彭涛,丁文江.有色金属固态回收技术研究进展与展望.材料导报,2009,23(6):77-80,89

18.陈长江,王渠东,尹冬弟,丁文江.内燃机活塞材料的研究进展.材料导报,2009, 23(8):62-65

19.陈长江,王渠东,尹冬弟,丁文江. 两种Mg-Gd-Y-Zr镁合金的热物理性能. 特种铸造及有色合金,2009,29(10):950-952

20.陈长江,王渠东,尹冬弟,丁文江. Mg-11Y-5Gd-2Zn-0.5Zr合金的显微组织和力学性能. 材料科学与工程学报,2009,27(6):829-833

21.郭炜,王渠东.大塑性变形制备超细晶储氢材料的研究进展.材料导报, 2009,23(10): 71-74

22.慕东,王渠东,沈保罗.渗硼对钢铁表面组织与性能影响的研究现状.材料导报,2009,23(7):45-48

23.Xiaoming YANG, Hujie YANG, Fan YANG, Shuming YIN, Wei WANG, Shouxin LI, and Qudong WANG. Tensile and Isothermal Fatigue Behaviors of Mg-12Gd-3Y-0.5Zr Alloy at High Temperatures. Journal of Materials Sciences and Technology, 2009, 25(06) 731-737

24.范亚夫, 赵宝荣, 王渠东等. Mg-Gd-系变形镁合金抗弹性能实验研究[J].弹道(已投稿).

25.YAFU FAN, BAORONG ZHAO, QUDONG WANG. Experimental studies on dynamic mechanical behaviors and anti-projectile capabilities of extruded magnesium alloy [J].Int. J. of Modern Physics B. (2008年10月北京AMDP会议)

26.范亚夫,王渠东.Mg-Gd-Y系变形镁合金Johnson-Cook材料模型参数的实验测定[J]. 爆炸与冲击(20090213待投稿).

27.J. Chen, Q. D. Wang, Z. Zhao, W. J. Ding. Super high strength Mg-9.8Gd-2.7Y-2.0Ag-0.4Zr cast magnesium alloy. Mater. Sci. Eng. A, 200906需要修改

 

2008：

1.Wang Qudong, Wei Yinhong, Y. Chino, and M. Mabuchi. High strain rate superplasticity in rolled AZ91 magnesium alloy. RARE METALS, 2008, 27(1):23-26

2.Q. D. Wang, J. B. Lin, M. P. Liu, W. J. Ding. Effect of trace Ti on the microstructure and mechanical properties of AM50 alloy. International Journal of Materials Research(formerly Z. Metallkd.), 2008, 99(7):761-765

3.Y. J. Chen, Q. D. Wang, H. J. Roven, M. P. Liu, M. Karlsen, Y. D. Yu and J. Hjelen. Network-shaped fine-grained microstructure and high ductility of magnesium alloy fabricated by cyclic extrusion compression.Scripta Materialia, 2008, 58(4): 311-314

4.Daquan Li, Qudong Wang, Wenjiang Ding. Precipitate phases in the Mg-4Y-4Sm-0.5Zr alloy. Journal of Alloys and Compounds. 2008, 465:119-126

5.Y. J Chen, Q. D. Wang, H. J. Roven, M. Karlsen, Y. D. Yu, M. P. Liu, J. Hjelen. Microstructure evolution in magnesium alloy AZ31 during cyclic extrusion compression. Journal of Alloys and Compounds, 2008, 462: 192-200

6.GAO Yan, WANG Qudong, GU Jinhai , ZHAO Yang , TONG Yan. Effects of heat treatments on microstructure and mechanical properties of Mg-15Gd-5Y-0.5Zr alloy.Journal of Rare Earth, 2008, 26,298-302. (SCI 306UI) (EI 081911243892)

7.GAO Yan, WANG Qudong, GU Jinhai, ZHAO Yang, Comparison of microstructure in Mg-10Y-5Gd-0.5Zr and Mg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting，Journal of Alloys and Compounds, 2009, 477: 374-378

8.Jinbao Lin, Qudong Wang, Liming Peng and Tao Peng. Effect of Cyclic Extrusion and Compression Processing on Microstructure and Mechanical Properties of As-Extruded ZK60 Magnesium Alloy. Materials Transaction, 2008, 49(5):1021- 1024

9.J.B. Lin, Q.D. Wang, L.M. Peng, H.J. Roven. Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression. J Alloys and Compounds. 2009,476(1-2): 441-445

10.J.B. Lin, Q.D. Wang, L.M. Peng, H.J. Roven. Study on deformation behavior and strain homogeneity during cyclic extrusion and compression. Journal of Materials Science, 2008. 43(21): 6920-6924

11.Ding Wenjiang, Li Daquan, Wang Qudong and Li Qiang. Microstructure and mechanical properties of hot-rolled Mg-Zn-Nd-Zr alloys.Materials Science and Engineering A, 2008,483-484: 228-230

12.Yongjun Chen, Hans. J. Roven, Qudong Wang, Manping Liu and Jinbao Lin. Effect of the second phase on the microstructure of magnesium alloys during cyclic extrusion compression. Materials Science Forum, 2008, 584-586: 523-527

13.Jiang Zheng, Qudong Wang, Peng Zhao, Congbo Wu. Optimization of high pressure die-casting process parameters using artificial neural network. International Journal of Advanced Manufacturing Technology，2009，pp. 1-8， DOI: 10.1007/s00170-008-1886-6

14.Liming Peng, Lin Du, Li Jin, Qudong Wang, Wenjiang Ding. Anisotropy of the Damping Capacity of Rolled Mg--0.4Zn-0.6Zr(ZK01) Alloy. In Magnesium Technology. 2008. Edited by Mihriban O. Pekguleryuz, Neale R. Neelameggham, Randy S. Beals and Eri A. Nyberg.The Minerals, Metals & Materials Society(TMS). P.247-251

15.WANG Wei, WU Guo-hua, WANG Qu-dong, HUANG Yu-guang, SUN Ming, DING Wen-jiang. Investigation of flux containing GdCl3 on recycling Mg-Gd-Y -Zr Scraps. Trans. Nonferrous Met. Soc. China, 2008, 18(S1): s292-s298

16.王渠东,林金保，彭立明，陈永军. 往复挤压变形对ZK60镁合金力学性能的影响.金属学报, 2008, 44(1):55-58

17.高岩,王渠东, 赵 阳等. Mg97ZnY2合金中LPSO结构的研究现状. 材料导报,2008,22(1):94-97

 

2007：

1.Q. D. Wang,Y. J Chen, J. B Lin, L. J Zhang, C. Q Zhai. Microstructure and properties of magnesium alloy processed by a new severe plastic deformation method. Materials Letters, 2007,61,(11):2213-2216

2.WANG Qudong, ZHAO Yang, LI Qinghua. Effects of CaCO3 Modificator on Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy. Materials Science Forum, 2007, 546-549:155-158

3.Qudong Wang, Daquan Li, Qiang Li, Wenjiang Ding. Effects of Er on microstructure and mechanical properties of Mg-Zn-Er-Zr magnesium alloy. Materials Science Forum, 2007, 546-549:105-108

4.Qiang Li, Qudong Wang, Daquan Li and Wenjiang Ding. Effect of Nd and Y addition on microstructure and mechanical properties of extruded Mg-Zn-Zr alloy. Materials Science Forum, 2007, 546-549: 413-416

5.Lin Jinbao, Wang Qudong, Peng Liming, Chen Yongjun, Ding Wenjiang. Effect of cooling rate on the microstructure and mechanical properties of ZK60 alloy. Materials Science Forum 2007, 546-549: 319-322

6.Yongjun Chen, Qudong Wang, , Jinbao Lin, Lujun Zhang, Chunquan Zhai, Fabrication of bulk UFG magnesium alloys by cyclic extrusion compression. Journal of Materials Science, 2007, 42: 7601-7603

7.Chen Yongjun, Wang Qudong, Peng Jianguo,Zhai Chunquan, Ding wenjiang. Effect of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy. Journal of materials processing technology, 2007, 182(1-3):281-285

8.Zhang Lujun, Wang Qudong, Chen Yongjun, Lin Jinbao. Microstructure evolution and mechanical properties of an AZ61 Mg alloy through cyclic extrusion compression. Materials Science Forum, 2007, 546-549:253-256

9.ZHAO Yang, WANG Qudong, GU Jinhai, GAO Yan, TONG Yan. Microstructure and Mechanical Properties of Mg-Gd-Sm-Zr alloy. Materials Science Forum, 2007, 546-549:159-162

10.GAO Yan, WANG Qudong, GU Jinhai, ZHAO Yang, TONG Yan. Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys. Materials Science Forum, 2007, 546-549: 163-166

11.Peng Zhao, Qudong Wang, Chunquan Zhai, Wenjiang Ding. Tensile and compressive creep behavior of coarse-grained Mg-Al-Sr castings. Materials Science Forum, 2007, 546-549:171-174

12.Daquan Li, Qudong Wang, Wenjiang Ding. INFLUENCE OF ROLLING TEMPERATURE ON MICROSTRUCTURE AND TENSILE PROPERTIES OF AZ31 SHEETS. Materials Science Forum, 2007, 546-549:311-314

13.Peng Zhao, Qudong Wang, Chunquan Zhai and Yanping Zhu. Effects of strontium and titanium on the microstructure, tensile properties and creep behavior of AM50 alloys. Materials Science and Engineering A, 2007, 444(1-2): 318-326

14.Li, Q., Wang, Q., Wang, Y., Zeng, X., Ding, W. Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg-Zn-Zr alloy. Journal of Alloys and Compounds, 2007, 427 (1-2), pp. 115-12

15.Peng Zhao, Qudong Wang, Liufa Liu, Zhongshan Wei, Chunquan Zhai. Fluidity of Mg-Al-Ca alloys in the high-pressure die casting process. International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde), 2007, 98(1): 33-38

16.Daquan Li, Qudong Wang, Wenjiang Ding. Effects of heat treatments on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A, 2007, 448:165-170

17.Zhou Yang, Peng Liming, Wang Qudong, Lin Jinbao, Ding Wenjiang. Influence of cooling rates on the dentrite morphology and hardness of the surface-chilled Mg-10Gd-3Y magnesium alloy. Materials Science Forum, 2007, 546-549:175-178

18.Yan Gao, Qudong Wang, Jinhai Gu, et al.Behavior of Mg-15Gd-5Y-0.5Zr alloy during solution heat treatment from 500 to 540 degrees.Materials Science & Engineering A, 2007, 459(1-2): 117-23(SCI 171IL) (EI 071610560537)

19.丁文江等著.镁合金科学与技术.科学出版社.2007.1(其中,王渠东著12章48.9万字的3章13万余字)

20.童炎, 王渠东, 高岩, 顾金海. Mg-13Gd-3Y-0.4Zr合金热处理工艺优化及其性能,轻金属,2007,(3):45-49

21.王玮, 吴国华, 王渠东,丁文江. 镁合金非熔剂净化工艺研究进展. 铸造设备研究, 2007, (4): 42-46

22.杜 林,王渠东,彭立明,章祯彦,马 岚. 挤压温度对Mg-0.4Zn-0.6Zr(ZK01)合金力学性能和阻尼性能的影响.材料导报,2007,21(5):31-33

 

2006：

1.WANG Qudong, PENG Jianguo, Suéry Michel, Jean-Jacques Blandin. Effects of aging on the microstructures and mechanical properties of extruded AM50+xCa magnesium alloys. RARE METALS, 2006,25(4):377-381

2.Wang Qudong, Chen Yongjun, Zhang Lujun etc. Microstructure and mechanical properties of AZ31-0.5wt pct Si alloy processed by ECAP. Transactions of Nonferrous Metals Socity of Chian, 2006, 16: s1660-s1663

3.Lin Jinbao, Wang Qudong, Chen Yongjun, Zhang Lujun. Effect of large deformation on the microstructure of ZK60 alloy. Transactions of Nonferrous Metals Socity of China, 2006, 16: s1750-s1753

4.Chen Yongjun, Wang Qudong, Peng Jianguo, Zhai Chunquan. Improving the mechanical properties of AZ31 Mg alloy by high ratio extrusion. Materials Science Forum, 2006,503-504: 865-870

5.Li Daquan, Wang Qudong, Wenjiang Ding. Characterization of phases in Mg-4Y-4Sm-0.5Zr alloy processed by heat treatment. Materials Science and Engineering A, 2006, 428:295-300

6.Chen Yongjun, Wang Qudong, Lin Jinbao. Zhai Chunquan. Microstructure and mechanical properties of AZ31 Mg alloy processed by high ratio extrusion. Transactions of Nonferrous Metals Socity of China, 2006, 16: s1875-s1878

7.Peng Zhao, Haoran Geng, Qudong Wang. Effect of melting technique on the microstructure and mechanical properties of AZ91 commercial magnesium alloys. Materials Science and Engineering A, 2006, 429: 320–323

8.H. T. Zhou, C. M. Liu, Z. J. Liu, J. Zhang, J. R. Ji, and Q. D. Wang. The Microstructures and Tensile Properties of AZ61-Re Alloy. Magnesium Technology 2006. P511-514

9.王渠东,彭建国,丁文江, M. Suéry, J. J. Blandin. 热处理对挤压添加钙AM50镁合金组织及力学性能的影响.机械工程材料,2006,30(8):5-9

10.陈勇军,王渠东,李德江,林金保,翟春泉,丁文江. 往复挤压工艺制备超细晶材料的研究与发展.材料科学与工程学报,2006, 24(1): 152-155

11.陈勇军,王渠东,翟春泉,丁文江.大塑性变形制备高强镁合金的研究与展望.机械工程材料, 2006,(3):12-15

12.吴从波,王渠东,赵鹏.Fe、Ni、Cu对AXJ530镁合金腐蚀性的影响.特种铸造及有色合金,2006,26(11):736-738

13.林金保,王渠东,陈永军.镁合金塑性成形技术的研究进展. 轻合金加工技术, 2006,(2);16-20

14.李大全,王渠东,丁文江. 稀土在变形镁合金中的应用. 轻合金加工技术,2006, 37(12): 5-8

 

2005：

1.Wang Qudong, Chen Yongjun, Peng Jianguo, Liu Manping, Ding Wenjiang, M. Suéry, J. J. Blandin. Microstructure and mechanical properties of AM50+xTi magnesium alloys extruded from as-cast and solution treated conditions. Materials Science Forum, 2005, 488-489: 629-632

2.Wang Qudong, Liu Manping, Ding Wenjiang, M. Suéry, J. J. Blandin. Microstructure and Mechanical Properties of Extruded AM50+xCa Magnesium Alloys. Materials Science Forum, 2005, 488-489: 119-122

3.Wang Qudong, Chen Yongjun, Chen Wenzhou, WEI Yin-hong, ZHAI Chun-quan, DING Wen-jiang. Centrifugally Cast Zn-27Al-xMg-ySi Alloys and Their In Situ (Mg2Si+Si)/ZA27 Composites. Mater. Sci. Eng. A. 2005, 394(1-2): 425-434

4.Qiang Li, Qudong Wang, Xiaoqin Zeng, Wenjiang Ding, Quanbo Tang, Shangdong Huang. Microstructure and Mechaical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy. Materials Science Forum, 2005, 488-489: 385-388

5.Manping liu, Qudong Wang, Xiaoqin Zeng, Guangyin Yuan, Yanping Zhu and Wenjiang Ding. Mechanical Properties and Creep Behavior of Mg-Al-Ca Alloys. Materials Science Forum, 2005, 488-489: 763-766

6.Peng Jianguo, Wang Qudong, Liu Manping, Chen Yongjun. Ding Wenjiang, M. Suéry1, J. J. Blandin.Effects of Heat Treatment on Microstructure and Mechanical Properties of Rolled AM50+xCa Alloys. Materials Science Forum, 2005, 488-489: 257-260

7.Qiang Li, Qudong Wang, Haitao Zhou, Xiaoqing Zeng, Ya Zhang, Wenjiang Ding. High strength extruded Mg-5Zn-2Nd-1.5Y-0.6Zr-0.4Ca alloy. Materials Letters, 2005, 59: 2549-2554

8.Zhou Hai-Tao, Yan An-Qing, Wang Qu-dong, Liu Chu-Ming. Dynamic recrystallization behavior of AZ61 magnesium alloy. Transactions of Nonferrous Metals Society of China, 2005, 15(5):1055-1061

9.Haitao Zhou, Xiaoqin Zeng, Liufa Liu, Qudong Wang, Yangping Zhu,Wenjiang Ding. Hot Compression Behavior of Liquidus Casting ZK60 Magnesium Alloy. Materials Science Forum, 2005, Vol. 488-489: 563-566

10.HE Shangming, PENG Liming, ZENG Xiaoqin, LIU Lipeng, WANG Qudong, DING Wenjiang, ZHU Yanping. Effects of variable La/Ce ratio on Microstructure and Mechanical Properties of Mg-5Al-0.3Mn-1RE Alloys. Materials Science Forum, 2005, 488-489: 231-234

11.王渠东,陈勇军,陈文周,魏胤红,翟春泉,丁文江. 离心铸造Zn-Al-Mg-Si合金及其自生表面复合材料. 上海交通大学学报,2005,39(7):1109-1114

12.王渠东,陈勇军,陈文周,魏胤红,翟春泉,丁文江. 离心铸造（Mg2Si+Si）自生增强锌基自生复合材料的组织与性能.复合材料学报, 2005,22(3):109-115

13.付鹏怀,王渠东,蒋海燕,翟春泉.镁合金熔炼技术研究进展.铸造技术,2005,(6):489-492

14.彭建国,王渠东,曾小勤,丁文江. 镁合金抗氧化及合金化阻燃研究进展. 轻合金加工技术, 2005,33(4): 16-20

15.赵鹏,王渠东,翟春泉.耐热铸造镁合金及其蠕变行为的研究.特种铸造及有色合金,2005,(Z1): 48-51

16.张陆军,王渠东,陈勇军.大塑性变形制备纳米结构材料.材料导报,2005,19,(Special issue 5):12-16

17.陈勇军,王渠东,彭建国,翟春泉,丁文江.大塑性变形制备细晶材料的研究、开发与展望. 材料导报,2005,19(4):77-80

18.黄晓锋,王渠东,刘六法,朱燕萍,袁广银,卢晨,丁文江.混合稀土对Mg-5Al-1Si组织及性能的影响.稀有金属材料与工程,2005,34(5):795-798

19.梁文科,朱建国,王渠东. NiTi形状记忆合金疲劳行为的研究现状. 材料导报, 2005,19,(Special issue 5):404-405,409

 

2004：

1.Qiang, Li; Dong, Wang Qu; Qin, Zeng Xiao; Jiang, Ding Wen. Microstructure and mechanical properties of hot-extruded Mg-Zn-Nd-Y-Zr alloy. JOM, 2004,56(11):37

2.Zhou Haitao, Liu Liufa, Wang Qudong, Lu Da, Zeng Xiaoqin, Ding Wenjiang. Strain softening and hardening behavior in AZ61 magnesium alloy. Journal of Materials Science and Technology, 2004, 6:691-693

3.N. Mebarki, M. Suéry, Q. Wang, J. J. Blandin. Microstructural changes during partial remelting of the AZ91 alloy modified with Ca additions.Sept. 21-23, 2004, LIMASSOL, Cyprus Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004 , Pages 563-570

4.H. T. Zhou, X. Q. Zeng, Q. D. Wang, W. J. Ding. A flow stress model for AZ61 magnesium alloy. Acta metallurgic sinica, 2004, 17(2):155-160

5.Liufa LIU, Haitao ZHOU, Qudong WANG, Yanping ZHU, Wenjiang DING. DYNAMIC RECRYSTALLIZATION BEHAVIOR OF AZ61 MAGNESIUM ALLOY. Adv. in Tech. of Mat. And Proc. J. (ATM), 2004, 6(2):158-165

6.Rongshi CHEN, J. J. Blandin, M. Suéry, Qudong WANG, Enhou HAN. Thermomechanical Processing and Superplasticity of AZ91 Magnesium Alloy. J. Mater. Sci. Technol., 2004, 20(3):295-297

7.Zhou-HT, Zeng-XQ, Liu-LL, Dong-J, Wang-QD, Ding-WJ, Zhu-YP. MICROSTRUCTURAL EVOLUTION OF AZ61 MAGNESIUM ALLOY DURING HOT DEFORMATION. MATER SCI TECHNOL 2004, 20(11): 1397-1402

8.王渠东,丁文江.镁合金及其成形技术的国内外动态与发展.世界科技研究与发展.2004, 26(3):39-46

9.王渠东,丁文江.镁合金研究开发现状与展望.世界有色金属.2004,(7):8-11

10.王渠东,丁文江.镁合金及其成形技术的最新发展.21世纪材料成形加工技术与科学.柳百成等编. P56-73. 机械工业出版社,2004,3

11.黄晓锋,王渠东,曾小勤,朱燕萍,卢晨,丁文江.钕对Mg-5Al-1Si高温蠕变及组织性能的影响.中国稀土学报,2004,22(3):361-364

12.黄晓锋,王渠东,曾小勤,袁广银,朱燕萍,丁文江.稀土对AM50力学性能及高温蠕变的影响.中国稀土学报,2004,22(4):493-496

13.黄晓锋,王渠东,卢晨,丁文江. Si对AM50力学性能和高温蠕变性能的影响.材料研究学报, 2004, 18(6): 630-634

14.周海涛,曾小勤,刘六法,王渠东,董杰,丁文江.热变形工艺参数对超低碳贝氏体钢转变行为和显微结构的影响.上海交通大学学报,2004,38(7):1091-1095,1110

 

2003：

1.Qudong Wang, Yinhong Wei, Wenzhou Chen, Yanping Zhu, Chunjiang Ma, Wenjiang Ding. In situ surface composites of (Mg2Si+Si)/ZA27 fabricated by centrifugal casting.Materials Letters, 2003, 57:3851-3858

2.ZHOU Hai-tao, WANG Qu-dong, WEI Yin-hong, DING Wen-jiang, ZHU Yan-ping, Y. Chino, M. Mabuchi. Flow stress and microstructural evolution in as rolled AZ91 alloy during hot deformation. Trans. Nonferrous Met. Soc. China, 2003,13(6):1265-1270

3.Wang Yeshuang, Wang Qudong, Ma chunjiang, Ding Wenjiang, Zhu Yanping. Effects of Zn and RE additions on the solidification behavior of Mg-9Al magnesium alloy. Materials Science and Engineering A, 2003,A342(1-2):178-182

4.Y. H. Wei, Q. D. Wang Y. P. Zhu etc. Superplasticity and Grain Boundary Sliding in Rolled AZ91 Magnesium Alloys at High Strain Rates, Materials Science and Engineering A，2003, 360(1-2):107-115

5.Man Ping Liu, Qu Dong Wang, Xiao Qin Zeng, Yin Hong Wei, Yan Ping Zhu, Chen Lu. Development of microstructure in solution-heat-treated Mg-5Al-xCa alloys. Z. Metallkd. 2003, 94(8): 886-891

6.Y.S.Wang, J. Z. Yu, Q. D. Wang, W. J.Ding. Heat treatment strengthening effects of rare earths on Mg-9Al alloy. Acta Metallurgic Sinica, 2003, 16(1):8-14

7.王渠东,魏胤红,陈文周,朱燕萍,马春江,丁文江.离心铸造Mg2Si和Si自生增强的锌基合金复合材料.中国有色金属学报,2003,13(6):1441-1446

8.王业双,王渠东,马春江,丁文江，朱燕萍.Zn和RE对Mg-9Al合金热裂倾向性的影响.中国有色金属学报，2003，13(1)：40-45

9.王业双,俞继志,王渠东等.镁合金热烈行为研究的测试方法探讨.材料导报,2003,17(11):72-74

10.周海涛,曾小勤,王渠东,丁文江.AZ31镁合金挤压工艺和组织性能分析.轻合金加工技术,2003,31(9):28-30

11.彭立明,曾小勤,朱燕萍,王渠东,丁文江.一种新型镁合金的开发及其应用.有色金属加工,2003,32(2):18-22

 

2002：

1.Wang Yeshuang, Wang Qudong, Wu Guohua, Zhu Yanping, Ding Wenjiang. Hot-tearing susceptibility of Mg-9Al-xZn alloy. Materials Letters, 2002,57:929-934

2.MANPING LIU, QUDONG WANG, ZILI LIU, GUANGYIN YUAN, GUOHUA WU, YANPING ZHU, WENJIANG DING.. Behavior of Mg-Al-Ca alloy during solution heat treatment at 415℃. J. Mater. Sci. Lett.2002,21:1281-1283

3.Yuan Guangyin, Wang Qudong, Ding Wenjiang. High temperature deformation behavior of permanent casting AZ91 alloy with and without Sb addition. J. Mater. Sci., 2002, 37:127-132

4.LIU Manping,WANG Qudong, ZENG Xiaoqin, LU Chen, ZHU Yanping, DING Wenjiang. Effects of solution heat treatment on the microstructures of Mg-5Al based alloys containing Ca and RE. RARE METALS,2002,21(Suppl.):54-59

5.Wang Yeshuang, Sun Baode, Wang Qudong, Zhu Yanping, Ding, Wenjiang. An understanding of the hot cracking mechanism in AZ91 magnesium alloy. Materials Letters, 2002,53(1-2):35-39

6.Zili Liu,Jingyu Hu, Qudong Wang,Ding Wenjiang,Zhu Yanping.Evaluation of the effect of vacuum on mold filling in the magnesium EPC process. J. Mater. Processing Technology, 2002,120:94-100

7.Manping Liu, Guangyin Yuan, Qudong Wang, Yinhong Wei, Wenjiang Ding, Yanping Zhu. Superplastic Behavior and Microstructural Evolution in a Commercial Mg-3Al-1Zn Magnesium Alloy. Mater. Trans., 2002,43(10): 2433-2436

8.G. Y. Yuan, Z. L. Liu, Q. D. Wang, W. J. Ding. Microstructure Refinement of Mg-Al-Zn-Si Alloys. Materials Letters, 56(2002),(1-2):53-58

9.Wang Yeshuang,Zhang Yongbo,Wang Qudong, Ma chunjiang, Ding Wenjiang, Zhu Yanping. MODELS FOR CASTING SOLIDIFICATION OF Mg-9Al ALLOY(in Chinese). ACTA METALLURGICAL SINICA, 2002, 38(4):78-84

10.Z. Liu, J. Hu, W. Ding, Q. Wang, Y. Zhu, Y. Lu, W. Chen. Effect of Processing Parameters on Mold Filling in Magnesium Alloy EPC Process. AFS Transactions, 2002, 108: 1425-1438

11.Zili Liu,Jingyu Hu, Qudong Wang,Ding Wenjiang,Zhu Yanping.Evaluation of the effect of vacuum on mold filling in the magnesium EPC process. J. Mater. Processing Technology, 2002,120:94-100

12.Manping Liu, Guangyin Yuan, Qudong Wang, Yinhong Wei, Wenjiang Ding, Yanping Zhu. Superplastic Behavior and Microstructural Evolution in a Commercial Mg-3Al-1Zn Magnesium Alloy. Mater. Trans., 2002,43(10): 2433-2436

13.G. Y. Yuan, Z. L. Liu, Q. D. Wang, W. J. Ding. Microstructure Refinement of Mg-Al-Zn-Si Alloys. Materials Letters, 56(2002),(1-2):53-58

14.Z. Liu, J. Hu, W. Ding, Q. Wang, Y. Zhu, Y. Lu, W. Chen. Effect of Processing Parameters on Mold Filling in Magnesium Alloy EPC Process. AFS Transactions, 2002, 108: 1425-1438

15.丁文江,王渠东,刘满平.轻合金技术新进展.2002高技术发展报告.中国科学院编,科学出版社.P60-74

16.魏胤红,王渠东,刘满平,丁文江.镁合金超塑性的研究现状及发展趋势.材料导报,2002,16(9):20-23

17.魏胤红,王渠东,周海涛,朱燕萍,丁文江,Y. Chino,M. Mabuchi.轧制AZ91镁合金超塑性研究.高技术通讯,2002,12(9):52-55,51

18.袁广银,刘满平,王渠东,朱燕萍,丁文江.Mg-Al-Zn-Si合金的显微组织细化.金属学报,2002,38(10):1105-1108

19.刘满平,马春江,王渠东,吴国华,朱燕萍,丁文江.工业态AZ31镁合金的超塑性变形行为.中国有色金属学报,2002,12(4):797-801

20.宋海宁,袁广银,王渠东,朱燕萍,丁文江. 耐热Mg-Zn-Si-Ca合金的显微组织和力学性能.中国有色金属学报,2002,12(5):956-960

21.王业双,张咏波,王渠东,马春江,丁文江,朱燕萍. Mg-9Al合金铸造凝固模型.金属学报,2002, 38(4):78-84

22.彭立明,曾小勤,朱燕萍,王渠东,丁文江.一种新型镁合金的开发及其应用.2002年中国材料研讨会论文摘要集,中国材料研究学会学术部.北京,2002,10,21-24.P.F5

23.魏胤红,王渠东,丁文江,朱燕萍.轧制AZ91镁合金超塑性变形过程中的微观结构演变, 2002年中国材料研讨会论文摘要集,中国材料研究学会学术部.北京,2002,10,21-24.P.F24

24.魏胤红,王渠东,丁文江.轻合金铸锻复合成型技术及其发展.首届中国国际轻金属冶炼加工与装备会议文集.周鸿章主编，2002.4.25-28: P.74-76

25.彭立明,曾小勤,曹幸,朱燕萍,王渠东,丁文江.固溶处理对含稀土AM60B和AZ91D镁合金组织的影响.首届中国国际轻金属冶炼加工与装备会议文集.周鸿章主编,2002.4.25-28: P.239-243

 

2001：

1.Wang Qudong, Chen Wenzhou, Zeng Xiaoqin,Lu Yizhen,Ding Wenjiang, Zhu Yanping, Xu Xiaoping, M. Mabuchi. Effects of Ca addition on the microstructure and mechanical properties of AZ91 magnesium alloy. J. Mater. Sci., 2001, 36(12): 3035-3040

2.Wang Qudong,Chen Wenzhou, Ding Wenjiang,Zhu Yanping M. Mabuchi. Effect of Sb on the Structure and Properties of AZ91 Magnesium Alloy. Metall. & Mater. Trans.,2001,32A(3):787-794

3.Chen Wenzhou, Wang Qudong,Zhai Chunquan et al.Functionally graded Zn-Al-Si in-situ composites fabricated by cebtrifugal casting. J. Mater. Sci. Lett.2001, 20(9): 823-826

4.X. Q. ZENG,Q. D. WANG,Y. Z. LU,W. J. DING,C. LU,Y. P. ZHU,C. Q. ZHAI,X. P. XU. Kinetic study on the surface oxidation of the molten Mg-9Al-0.5Zn-0.3Be alloy. J. Mater. Sci.,2001,36(10):2499-2504

5.Zeng Xiaoqin, Wang Qudong, Lu Yizhen Zhu Yanping, Ding Wenjiang, Zhao Yunhu. Influence of beryllium and rare earth additions on ignition-proof magnesium alloys. J. Mater. Processing Technol., 2001, 112(1): 17-23

6.Zeng Xiaoqin, Wang Qudong, Lü Yizhen, Ding Wenjiang, Zhu Yanping. Zhai Chunquan, Lu Chen, Xu Xiaoping. Behavior of Surface Oxidation on Molten Mg-9Al-0.5Zn-0.3Be Alloy. Mater. Sci. & Eng. A, 2001,301(2):154-161

7.Yizhen Lü, Qudong Wang, Xiaoqin Zeng et al. Effect of Si on the the precipitation behavior of Mg-6Al alloy. J. Mater. Sci. Lett., 2001,20:397-399

8.Y. Z. Lü, Q. D. Wang, X. Q. Zeng, Y. P. Zhu, W. J. Ding. Behavior of Mg-6Al-xSi Alloys During Solution Treatment at 420℃. Mater. Sci. Eng. A, 2001,301(2): 255-258

9.Yizhen Lü, Qudong Wang, Xiaoqin Zeng, Wenjiang Ding Yanping Zhu. Effects of Si on the Microstructure, Fluidity, Mechanical Properties and Fracture Behavior of Mg-6Al Alloy. Mater. Sci. Technol., 2001, 17(2):207-214

10.Lan Jie, He Junjie, Ding Wenjiang, Wang Qudong, Zhu Yanping. Study on Heterogeneous Nuclei in Cast H13 Steel Modified by Rare Earth. Journal of Rare Earths, 2001,19(4):280-283

11.CHUNJIANG MA, DI ZHANG, WENJIANG DING, QUDONG WANG. Damping capacity of SiCw/MgLiAl composites. J. Mater. Sci. Lett., 2001, 20: 3327-3329

12.曾小勤,王渠东,吕宜振,丁文江,朱燕萍,翟春泉,卢晨.Mg-9Al-0.5Zn-0.1Be-xCa合金组织和力学性能研究.机械工程材料,2001,25(5):15-18

13.陈文周,王渠东,翟春泉,马春江,朱燕萍,何畏,丁文江.离心铸造自生Zn-Al-Si表面复合材料的组织与性能.中国有色金属学报,2001,11(3):416-423

14.刘新宽,向阳辉,王渠东,丁文江.Mg合金的防蚀处理.腐蚀科学与防护技术,2001,13(4):211-213,222

15.王业双,丁文江,王渠东.微机系统在合金热裂研究中的应用.中国有色金属学报,2001,11(S1):52-55

16.王业双,丁文江,王渠东,朱燕萍.AZ91合金的热裂行为研究.金属学报,2001, 37(5):527-530

17.王业双,张咏波,丁文江,王渠东.镁合金的热裂行为测试研究.特种铸造及有色合金.2001,(3):13-16

18.兰杰,贺俊杰,丁文江,王渠东,朱燕萍.变质CH13钢中CeO3异质核心作用的研究.中国稀土学报2001,19(2):142-145

19.翟春泉,曾小勤,丁文江,王渠东,吕宜振,徐小平.镁合金的开发与应用.机械工程材料,2001,25(1):6-10

20.袁广银,孙扬善,曾小勤,吕宜振,王渠东,丁文江.Bi对AZ91镁合金时效析出动力学过程的影响.上海交通大学学报,2001,35(3):451-456

 

2000：

1.Wang Qudong,Lu Yizhen, Zeng Xiaoqin,Ding Wenjiang,Zhu Yanping.EFFECTS OF RE ON THE MICROSTRUCTURE AND PROPERTIES OF AZ91 MAGNESIUM ALLOY. Trans. of Nonferrous Metals Society of China, 2000,10(2): 235-239

2.Yizhen Lü, Qudong Wang, Xiaoqin Zeng, Wenjiang Ding Yanping Zhu. Effects of rare earths on the microstructure, properties and fracture behavior of Mg-Al alloys. Mater. Sci. Eng. A, 2000, 278:66-76

3.Y. Z. Lü, Q. D. Wang, W. J. Ding et al. Fracture behavior of AZ91 magnesium alloy. Materials Letters, 2000, 44(5):262-268

4.Lü Yizhen, Wang Qudong, Ding Wenjiang, Zeng Xiaoqin. Fluidity of Mg-Al-alloys and the effect of alloying elements. Z. Metallkunde, 2000,91(6): 477-482

5.X. Q. Zeng, Q. D. Wang, Y. Z. Lü,W. J. Ding, C. Lu, Y. P. Zhu, C. Q. Zhai, X. P. Xu. Study on Ignition-proof Magnesium Alloy with Beryllium and Earth Additions. Scripta MATERILIA, 2000,43(5):403-409

6.Lan Jie, He Junjie, Ding Wenjiang, Wang Qudong, Zhu Yanping. Effect of Rare Earth on the Microstructure and Impact Toughness of Cast 0.4C-5Cr-1.2Mo-1.0V Steel. ISIJ International, 2000, 40(12):1275-1282

7.王渠东,曾小勤,吕宜振,丁文江.高温铸造镁合金的研究与应用.材料导报2000,(3):21-23

8.王渠东,吕宜振,曾小勤,丁文江,卢晨.镁合金在电子器材壳体中的应用.材料导报,2000,14(6):22-24

9.王渠东,曾小勤,吕宜振,丁文江.高温铸造镁合金的研究与应用.材料导报2000,(3):21-23

10.王渠东,吕宜振,曾小勤,丁文江,卢晨.镁合金在电子器材壳体中的应用.材料导报,2000,14(6):22-24

11.王渠东,丁文江.轿车用阻燃镁合金的研制.材料导报,2000,14(特刊):53-56

12.王业双,王渠东,丁文江,卢晨.合金的热裂形成机理及其研究进展. 特种铸造及有色合金,2000,(2):48-50

13.曾小勤,王渠东,吕宜振,丁文江,卢晨,朱燕萍,翟春泉,徐小平. Mg-9Al-0.5Zn-0.3Be熔体表面氧化行为.中国有色金属学报, 2000, 10(5): 667-671

14.赵云虎,王渠东,丁文江,曾小勤,吕宜振,朱燕萍.Be对铸造Mg合金组织和力学性能的影响. 特种铸造及有色合金,2000,(3):10-12

15.刘子利,王渠东,丁文江.消失模铸造充型过程的研究进展及展望.铸造,2000,(4):213-218

16.吕宜振,王渠东,曾小勤,丁文江,朱燕萍.镁合金在汽车上的应用现状及发展趋势.材料导报,2000, 14(特刊):57-60

17.倪红军,王渠东,丁文江.镁合金半固态铸造成形技术(SSP)的研究与应用,铸造技术,2000,(5):36-39

18.胡晶玉,刘子利,王渠东,丁文江.AZ91镁合金负压消失模铸造流动性的研究.特种铸造及有色合金,2000,(3):16-19

19.曾小勤,翟春泉,朱燕萍,王渠东,丁文江.镁合金锭质量控制.特种铸造及有色合金,2000, (增刊1):40-42

20.赵云虎,曾小勤,丁文江,王渠东,朱燕萍.Be和Ca对 Mg-9Al-0.5Zn合金表面氧化行为的影响.中国有色金属学报,2000,10(6):847-852

21.刘子利,胡晶玉,丁文江,王渠东.浇注系统对AZ91镁合金消失模铸造流动性的影响,铸造技术,2000,(4):43-45

22.刘新宽,马明亮,周敬恩,王渠东,丁文江.球磨促进碳热还原反应合成氮化铝研究.功能材料,2000,31(1):82-83,86

23.兰杰,贺俊杰,丁文江,王渠东,朱燕萍,翟春泉,徐小平.RE对铸造H13钢凝固组织和冲击韧性的影响.钢铁,2000,35(10):48-50,66

24.刘新宽,马明亮,席生歧,周敬恩,王渠东,丁文江.机械力活化合成机制研究,稀有金属材料科学与工程,2000,29(6):382-385

25.刘新宽,马明亮,席生歧,周敬恩,王渠东,丁文江.氧化铝碳热还原反应机制及其热力学,中国有色金属学报,2000,10(S1):46-49

26.刘新宽,马明亮,席生歧,周敬恩,王渠东,丁文江.机械力活化合成纳米晶氮化铝研究,硅酸盐学报,2000,28(5):468-471

27.刘新宽,马明亮,席生歧,周敬恩,王渠东,丁文江.氧化铝高能球磨时机械力化学效应研究.材料科学与工艺,2000,8(2):41-45

 

1999：

1.Wang Qudong, Zeng Xiaoqin, Lu Yizhen, Ding Wenjiang, Zhu Yanping. IGNITION-PROOF MAGNESIUM ALLOYS AND THEIR FOUNDRY TECHNOLOGY. Proc. 99’ Asian Industrial Technology Congress. HongKong. 1999.4.26-29

2.Wang Qudong, Lu Yizhen, Zeng Xiaoqin, Ding Wenjiang, Zhu Yanping, Li Qinghua,Lan Jie.Study on the Fluidity of AZ91+xRE Magnesium Alloy.Mater. Sci. & Eng. A, 1999, 271(1-2):109-115

3.Wang Qudong, Ding Wenjiang, Jin Junze.The step growth of primary silicon observed by decantation during centrifugal casting. Mater. Sci. & Techn. 1999, 15(8): 921-925

4.王渠东,程毓,曾小勤,丁文江.蠕墨铸铁排气管质量的超声波检测.无损检测,1999, 21(1):27-28

5.王渠东,吕宜振,曾小勤,丁文江.稀土在铸造镁合金中的应用.特种铸造及有色合金,1999,(1):43-47

6.王渠东,丁文江,翟春泉,徐小平,金俊泽.铝硅合金中初晶Si的台阶生长.上海交通大学学报.1999,33(2):142-145

7.王渠东,丁文江，金俊泽.离心铸造铝硅合金初晶自生复合材料的研究.特种铸造及有色合金,1999,(增刊1):9-11

8.吕宜振,王渠东,曾小勤,丁文江,朱燕萍.镁合金在汽车上的应用现状.汽车技术,1999, (8):28-31

9.曾小勤,王渠东,吕宜振,朱燕萍,丁文江.阻燃镁合金研究.铸造,1999,(6):4-7

10.曾小勤,王渠东,吕宜振.镁合金熔炼阻燃方法及进展.轻合金加工技术，1999,(9):5-8

11.曾小勤,王渠东,吕宜振,丁文江,朱燕萍.镁合金应用新进展.中国镁业,1999,(2):6-8

12.兰杰,贺俊杰,王渠东,丁文江.铸造模具研究概况.特种铸造及有色合金,1999, (增刊1): 123-125

13.兰杰,贺俊杰,王渠东,丁文江.铸造模具的研究和应用.特种铸造及有色合金.1999,(增刊1):123-125

 

1998：

1.王渠东,丁文江,金俊泽.离心铸造复合材料的研究与发展.材料导报,1998,12(6):61-64

2.王渠东,丁文江,翟春泉,徐小平,金俊泽.固液反应合成铝基自生复合材料.特种铸造及有色合金,1998,(6):11-13

3.王渠东,丁文江,金俊泽,陈秋勇,尹衍升.覆砂金属型Al-Fe合金自生梯度复合材料.铸造,1998,(10):16-21

4.王渠东,丁文江,金俊泽.离心倾液法与初晶硅的生长.人工晶体学报,1998,27(1):94-99

5.王渠东,丁文江,金俊泽.离心铸造过共晶Al-Si合金自生表面复合材料.复合材料学报,1998,15(3):7-11

6.曾小勤,王渠东,吕宜振,丁文江,朱燕萍.镁合金应用新进展.铸造,1998,(11): 39-43

7.吕宜振,翟春泉,王渠东,曾小勤,朱燕萍.压铸镁合金的应用现状及发展趋势.铸造,1998, (12):50-53

8.曾小勤,王渠东,吕宜振,丁文江,朱燕萍.镁合金应用新进展.铸造,1998,(11): 39-43

9.吕宜振,翟春泉,王渠东,曾小勤,朱燕萍.压铸镁合金的应用现状及发展趋势.铸造,1998, (12):50-53

 

1997：

1.Wang Qudong,Jin Junze.Centrifugal Casting In Situ Surface Composites of Al-20wt%Si Alloy. Proc. Fifth Asian Foundry Congress. Nanjing: Southeast University Press. 1997,9:P433-436

2.Wang Qudong,Jin Junze.In Situ Gradient Double-layer Composites by Centrifugal Casting Al-Fe Alloy.Trans.of Nonferrous Metals Society of China, 1997,7(1):125-130

3.王渠东,金俊泽.离心铸造Al-20wt%Si合金自生表面复合材料的组织与性能.航空材料学报,1997,17(2):6-13

 

1996：

1.王渠东,金俊泽.离心铸造Al-Cr合金自生梯度复合材料.铸造,1996,(4):8-12

 

1995：

1.冯波,王渠东,赵家政.利用热化学反应制备金属基复合物.新技术新工艺,1995,(2):24-26

 

1994：

1.王渠东.喷射沉积金属基复合材料的研究与发展.兵器材料科学与工程,1994,(2):11-18

2. 王渠东,曹兴言,李隆盛.几种干扰退火元素对离心铸造球墨铸铁管退火过程的影响与控制.铸铁管,1994,(1):20-24

3.王渠东,金俊泽.离心铸造Al-Fe合金复合管件.94’秋季中国材料研讨会论文集,P221-224

 

1993：

1.王渠东,程毓.锑涂料对高碳铸铁组织的影响.新技术新工艺,1993,(1):6-8

2.王渠东.锑对高碳铸铁组织的影响.四川工业学院学报,1993,(1):35-41

 

1991：

1.王渠东,曹兴言,李隆盛.锰、铬、铜、锡对离心铸造球墨铸铁管退火性能的综合影响.球铁, 1991,(1):3-6

2.王渠东,曹兴言,李隆盛.离心铸造球墨铸铁管组织和元素的分布.特种铸造及有色合金, 1991,(3):3-6

3. 曹兴言,王渠东,张驰,李隆盛,梁显栋,王春成,张秀山,刘肇津.砷和钛对离心铸造球墨铸铁管组织和性能的影响.特种铸造及有色合金,1991,(6):3-6

 

1990：

1.王渠东,曹兴言,李隆盛.几种干扰退火元素对离心铸造球墨铸铁管退火性能的影响与控制. 铸造,1990,(8):21-24

 

 

 

发明专利：

 

 

 

 

1.王渠东,徐建伦.移动电极法金属液位渣厚自动测试.中国发明专利申请号No.97 1 06380.X(公开号1196479，公开日：1998.10.21)

2.王渠东,徐建伦,马金昌.金属液位渣厚测试探头.中国实用新型专利 ZL97 23429.4(授权公告号: 2310986)

3.王渠东,丁文江.压铸阻燃镁合金及其熔炼和压铸工艺.中国发明专利申请号 No.99 1 13863.5(公开号1241643)(专利号ZL99 1 13863.5)

4.丁文江,王渠东.铸造阻燃镁合金及其熔炼和铸造工艺.中国发明专利申请号 No.99 1 13861.9(公开号1241641) (专利号ZL99 1 13861.9) 2003年中国专利优秀奖.中华人民共和国国家知识产权局

5.丁文江,王渠东.塑性变形阻燃镁合金及其熔炼和塑性变形工艺. 中国发明专利申请号No.99 1 13862.7(公开号1241642) (专利号ZL99 1 13862.7) 2004年上海市优秀发明专利二等奖

6.王渠东,丁文江.测试合金流动性的装置.中国实用新型专利申请号No.99 239455.4(授权公告号: 2389364) (专利号ZL99239455.4)

7.王渠东,丁文江.测试合金流动性的模样.中国实用新型专利申请号 No.99 239454.6(授权公告号: 2389363) (专利号ZL99 239454.6)

8.曾小勤,丁文江,王渠东,卢晨. 耐热阻燃压铸镁合金及其熔炼铸造工艺. 中国发明专利申请号 00115299.8(公开号 1266105)(已授权)

9.蒋海燕,孙宝德,倪红军,王渠东,丁文江. 铝合金熔体除氢旋转脉冲喷吹方法. 中国发明专利ZL 00125770.6

10.蒋海燕,孙宝德,倪红军,王渠东,丁文江. 铝合金熔体除氢旋转脉冲喷吹装置.中国发明专利ZL 00125771.4

11.王业双,马春江,王渠东, 丁文江.低热裂倾向性固溶强化高强度铸造镁合金. 中国发明专利号：ZL01139042.5 <申请号>01139042<公告号>1169989<公开号>1360078<申请日>20011204<公开日>20020724<授权日>20041006<授权公告日>20041006

12.王业双,马春江,王渠东, 丁文江.低热裂倾向性高强度压铸镁合金. 中国发明专利号：01139041.7(ZL01139041.7) <申请号>01139041<公告号>1114708<公开号>1360077<申请日>20011204<公开日>20020724<授权公告日>20030716

13.刘满平,王渠东,曾小勤,卢晨,丁文江.Ti细化抗蠕变镁合金及其熔铸工艺.中国发明专利ZL200410017693.1 <申请号>200410017693<公告号>1238545<公开号>1563458<申请日>20040415<公开日>20050112<授权日>20060125<授权公告日>20060125

14.刘满平,王渠东,曾小勤,卢晨,丁文江.高强度高塑性Mg-Al基镁合金.中国发明专利ZL200410017862.1 <申请号>200410017862<公告号>1238546<公开号>1563459<申请日>20040422<公开日>20050112<授权日>20060125<授权公告日>20060125

15.王渠东,陈永军,翟春泉,丁文江. 制备超细晶材料的S形等通道转角往复挤压模具.中国实用新型专利ZL200420114965.5 <申请号>200420114965<公告号>2750919<申请日>20041229<公告日>20060111<授权日>20060111<授权公告日>20060111

16.王渠东,陈永军,翟春泉,丁文江.制备超细晶材料的C形等通道往复挤压模具.中国实用新型专利ZL200420114966.X(20041229) <申请号>200420114966<公告号>2757953<申请日>20041229<公告日>20060215<授权日>20060215<授权公告日>20060215

17.陈勇军,王渠东,翟春泉,丁文江. 制备超细晶材料的S形转角往复挤压模具. 中国实用新型专利ZL200420114968.9(20041229) <申请号>200420114968<公告号>2757954<申请日>20041229<公告日>20060215<授权日>20060215<授权公告日>20060215

18.陈勇军,王渠东,翟春泉,丁文江. 制备超细晶材料的转角往复挤压模具. 中国实用新型专利ZL200420114967.4(20041229) <申请号>200420114967<公告号>2765691<申请日>20041229<公告日>20060322<授权日>20060322<授权公告日>20060322

19.陈勇军,王渠东,翟春泉,丁文江.制备超细晶材料的反复镦粗挤压模具. 中国实用新型专利ZL200420114969.3(20041229)

20.王渠东,陈勇军.螺旋式挤压成型方法.中国发明专利ZL200510026807.3(20050616) <申请号>200510026807<公开号>1709602<申请日>20050616<公开日>20051221

21.王渠东,陈永军,翟春泉,丁文江.含Ti高强变形镁合金.中国发明专利ZL200410066787.8(2004年9月29日) <申请号>200410066787<公开号>1614062<申请日>20040929<公开日>2005022.

22.王渠东,陈永军,翟春泉,丁文江.高强抗蠕变变形镁合金的制备工艺.中国发明专利ZL200410066788.2(2004年9月29日) <申请号>200410066788<公开号>1614063<申请日>20040929<公开日>20050511

23.陈永军,王渠东,翟春泉,丁文江.高强变形镁合金制备工艺. 中国发明专利ZL200410066790.X(2004年9月29日) <申请号>200410066790<公开号>1614065<申请日>20040929<公开日>20050511

24.陈永军,王渠东,翟春泉,丁文江.廉价的含Ca高强耐热变形镁合金. 中国发明专利ZL200410066791.4(2004年9月29日) <申请号>200410066791<公开号>1614066<申请日>20040929<公开日>20050511

25.王渠东,陈永军. 螺旋式挤压成型加工装置. 中国发明专利ZL200510026809.2(20050616) <申请号>200510026809<公开号>1709604<申请日>20050616<公开日>20051221

26.陈永军,王渠东.折线式挤压成型方法.中国发明专利ZL200510026806.9(20050616) 申请号>200510026808<公开号>1709603<申请日>20050616<公开日>20051221

27.陈永军,王渠东.折线式挤压成型装置.中国发明专利ZL200510026808.8(20050616)

28.陈永军,王渠东.制备超细晶材料的U形等通道反复挤压装置.中国发明专利ZL200510026810.5(20050616) <申请号>200510026810<公开号>1709605<申请日>20050616<公开日>20051221，20070105已经授权

29.王渠东,陈永军,翟春泉,丁文江.含Ca、Si高强抗蠕变变形镁合金. 中国发明专利ZL200410066789.7(2004年9月29日) <申请号>200410066789<公开号>1614064<申请日>20040929<公开日>20050511

30.王渠东,吴昀,陈永军.制备泡沫金属的含盐石膏模料.中国发明专利ZL200510029070.0 <申请日>20050825公开号>1730194

31.林金保,王渠东.制备超细晶材料的往复挤压装置.中国实用新型专利ZL200720075526.1(申请日：2007.10.18) (授权日：2008.7.23)

32.林金保,彭立明,王渠东.用于金属形变原位动态观察的拉伸装置.中国实用新型专利ZL200720075527.6(申请日：2007.10.18) (授权日：2008.7.9)

33.顾金海,王渠东,高岩,金田润也.高强度抗蠕变镁合金及其制备方法.中国发明专利ZL200610141358.1(申请日：2006.09.29) (授权日：2009.09.30)

34.王渠东,郑江.压铸耐热镁合金.中国发明专利ZL200710037029.7(申请日：2007-2-1) (公开号CN101012524)<公开日>20070808(授权日：2008.10.08)

35.王渠东,陈勇军.制备大块超细材料的镦压模具.中国发明专利申请号200710045628.3(申请日20070906)(公开号CN101116880,公开日2008.02.06，授权日20090304)

36.王渠东,彭涛.用于健康空调过滤系统的泡沫金属薄板制备方法.中国发明专利ZL200710038290.9(申请日20070322，授权日20090603)

37.王渠东.制备大块均匀超细材料的镦压方法.中国发明专利ZL 200710045629.8(申请日20070906)(公开号CN101117694，公开日2008.02.06 ，授权日20090610)

38.王渠东,林金保,彭涛.粉末压制制备多孔泡沫镁的方法.中国发明专利申请号200710047138.7(申请日：2007.10.18，授权日：2009.8.19)

39.王渠东,金正力,郑江.含钆压铸耐热高锌镁合金及其制备方法.中国发明专利ZL200710170765.x(申请日：2007.11.20，授权日20091202)

40.王渠东,林金保. 制备块体超细晶材料的反复挤压装置.中国实用新型专利ZL200920067871.x(申请日：2009.02.19，授权日：2009.11.4)

41.王渠东,赵阳, 郑江. 抗蠕变镁合金及其制备方法.中国发明专利ZL200810034854.6(申请日：2008.03.20，授权日：20100324)

42.王渠东,赵政, 丁文江. 含Ag铸造镁合金及其制备方法.中国发明专利ZL200810040923.4(申请日：2008.07.24，授权日：20100421)

43.王渠东,郑江, 顾金海, 金正力.压铸耐热镁合金及其制备方法. 中国发明专利ZL200810042774.5(申请日：2008.09.11，授权日：20100602)

44.王渠东,高岩.含铜耐热稀土镁合金及其制备方法，中国发明专利申请号 200810202296.X(申请日：2008.11.06，授权日：20100616)

45.陈长江,王渠东,尹冬第,丁文江.镁钆钇三元中间合金的制备方法.中国发明专利申请号200910054320.4(申请日：20090702，授权日：20101006)

 

46.黄晓锋,王渠东,曾小勤,卢晨,丁文江.Mg2Si和Y复合增强镁基合金及其熔铸工艺.中国发明专利申请号200410016773.5 <申请号>200410016773<公开号>1560299<申请日>20040304<公开日>20050105(特种铸造及有色合金，200803专利文献信息P2-2列)

47.李强,王渠东,